MSP/MSPR SUMP PUMP
| Scope of use |
1.5”~8” (40mm~2,000mm) |
| Maximum pressure |
109psi (750kPa) |
| Processing capacity |
3,522gpm (800m3/hr) |
| Processing treatment |
110ft (34m) |
ㅣFeatures
A concave impeller of five or eight wings induces flow, preventing the pieces from being damaged or broken into smaller pieces
Screen entrances and wide impeller passages reduce the risk of clogging
Slurries mixed with large particles can be treated stably
Made of various metals and elastomers, it can be applied to various types of slurry
Extend the wear life of the pump with the selection of suitable materials based on fluid
Cantilever shaft design eliminates the need for lower flood bearings, leading to failure
Adjustment of suction extension options allows you to extend beyond the standard length, providing an efficient alternative to cost even when the standard length is exceeded
Motor connection is possible on the axis, under the axis, diameter, etc., and can be installed in small spaces
Cantilever design reduces water usage costs and facilitates installation and maintenance by eliminating the need for gland flushing water or submerged bearings
The upper and lower suction designs allow operation in "snower" conditions, without the need for separate priming
Only some parts are compatible with other vertical pump models
ㅣPart, component
1. Shaft SP-Steel SPR-Elastomer covered steel |
2. Upper bearing seal Labyrinth, piston rings and grease purge |
3. Upper bearing Heavy duty grease lubricated parallel roller |
4. Bearing housing Robust heavy duty, SC iron |
5. Lower bearings Heavy duty grease lubricated double taper roller |
6. Lower bearing seal Lip Seal and Flinger |
7. Shims Allow vertical adjustment of the impeller in the casing |
8. Mounting plate SP-Steel SPR-Elastomer covered steel |
9. Column SP-Steel SPR-Elastomer covered steel |
10. Discharge pipe SP-Steel SPR-Elastomer covered steel |
11. Upper strainer SP- Stainless Steel SPR-Polyurethane |
12. Back liner seal SP-Elastomer |
13. Impeller thread seal SP-Elastomer |
14. Impeller SP-UltraChrome alloy SPR-Elastomer moulded metal |
15. Casing SP-UltraChrome alloy SPR-Elastomer moulded metal |
16. Lower strainer SP-Polyurethane SPR-Elastomer moulded metal |
17. Socket head protectors SPR-Elastomer moulded |
18. Column clamp SPR-Elastomer moulded metal |
ㅣQuick Selection Chart
